Tycon Systems TP-SW5G-NC 5 Port High Power Passive POE Gigabit Switch - 12-56V

The SW5 Series Power Over Ethernet (POE) switches offered by Tycon Power Systems are fully automatic high speed 5 port Ethernet switches with up to 2A of POE power per port. Universal Voltage 10/100/1000MB POE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the switch. Also accepts 12-57VDC (1A max) Passive POE input on port 5. 1A per port.

• High power 10/100 and 1000mb ("g") poe switch
• Remotely power equipment thru cat5 cable up to 100m
• Up to 2a per port
• Built-in surge protection
• Automatic mdi/mdi-x crossover
• Automatic speed and duplex sensing
• 1k self learning mac address table
• Compact size
• High temperature operation

• Ports - 1 data/POE input and 4 data/POE, automatic crossover and polarity
• Transmission Speed - 1000Mbps / 100 Mbps /10 Mbps Auto-negotiation
• Switch Technology - Store and Forward
• Protocol - CSMA/CD
• Flow Control - IEEE802.3x(full-duplex), Back Pressure(half-duplex)
• Data Transmission Rate - 1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT
• Address Table - 1K MAC, self-learning
• Connections - Shielded RJ45
• POE Protection - Over Temperature, Over Current, Over/Under Voltage
• Data Surge Protection - IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns) IEC61000-4-5 (Lightning) 20A (8/20µs)
• Operating Humidity (RH) - 5% - 90% (non condensing)
• Storage Temperature - 55 to +105°C (-67 to +221°F)
• Self Consumption - < 3 Watts
• Operating Temp - 20 to +75°C
• Maximum POE Power - 1A per port